Jul 17 , 2019

Publisher: SanDeYing

How to Design PCB Silkscreens to Ensure Usability

Silkscreen designs may range from very simple to quite complicated. It is just as common to not make sufficient use of this opportunity to provide identification and markings to aid your board’s assembly as it is to include too much information. However, following the simple guidelines below will help you make the best use of your silkscreen.

How to Design PCB Silkscreens to Ensure Usability

Design Guidelines for PCB Silkscreens

1. Determine which process your CM uses to create silkscreens

Most CMs will not utilize all three of the silkscreen processes; therefore, you should find out what method your CM implements. This will impact your design in terms of size, clearances, and location of silkscreen markings and other elements, such as component pads, traces, and vias.

2. Account for silkscreen items during PCB layout

For readability, markings such as polarity, pin one, and reference indicators need to be as close to the associated components as possible. These additional real estate requirements should be considered as you are creating your layout to ensure there is no overlap or covering of the indicators.

3. Choose fonts based on CM’s method

Some PCB design packages allow you to create virtually any font style for your silkscreen. However, the number of fonts that your CM can produce may be much more restricted. You should consult with your CM to ensure that you are incorporating fonts that can actually be generated on your board.

4. Do not overuse silkscreen markings

It can be tempting to include indicators for all components and include other informational imagery that may be helpful for assembly, testing, or repair of your board. However, with the ongoing evolution towards smaller and densely packed PCBs, this is probably not possible. Therefore, you should prioritize the markings that you include as follows:

  • Regulatory requirements; such as lead-free labeling required by J-STD-609A Marking and Labeling of Components, PCBs and PCBAs to Identify Lead (Pb), Lead-Free (Pb-Free) and Other Attributes from IPC.
  • Manufacturer identification; including markings such as board part number, serial number, labels, and the logo.
  • Assembly aids; such as polarity and pin one indicators. Reference indicators should be used based on available space.
  • Testing aids; such as test point indicators, mode and/or jumper indicators.

Following the guidelines above on how to design PCB silkscreens will help you make the best use of identification and labeling on your board.

Inquiry Now!

? 2019 Shenzhen SanDeYing Electronic Co., Ltd | All Right Reserved | Design by Gemelsoft.

? ?
下载二八杠 北京福彩快乐8官网开奖记录 nba停赛 app下载开元棋牌官方 广东快乐十分助手开奖 天津福利彩票快乐10分开奖结果 北京麻将规则 重庆幸运农场电视走势图 贵州茅台股票分析宏观经济分析 足球规则 经典麻将单机版 云南快乐十分直播开奖 pk10一天几期 广东福彩26选五走势图 平特肖精准公式 今日p3试机号 大发PK0官网